第一户外
冶铁为具,古今如一
点击按钮自动加关注代码——新浪微博 世界名刀第一户外
当前位置
首页 > 世界名刀 > Stride|挺进者 > 折刀 > Strider/挺进者 Duane Dwyer Custom SMF Unibody (Integral)德怀尔杜安定制SMF一体式背夹PD-1钢纯钛雕刻美国国旗图案手柄高端手工折刀
  • Strider/挺进者 Duane Dwyer Custom SMF Unibody (Integral)德怀尔杜安定制SMF一体式背夹PD-1钢纯钛雕刻美国国旗图案手柄高端手工折刀
Strider/挺进者 Duane Dwyer Custom SMF Unibody (Integral)德怀尔杜安定制SMF一体式背夹PD-1钢纯钛雕刻美国国旗图案手柄高端手工折刀
  • 商品货号:ECS002527
  • 人  气  值:17500
  • 商品品牌:挺进者[Strider]
  • 用户评价:comment rank 5
  • 购买数量:    商品总价:
分享到: 转贴到开心网 分享到新浪微博 添加豆瓣

商品描述

购买记录

用户评价

  • ECS002527
  • Strider/挺进者 Duane Dwyer Custom SMF Unibody (Integral)德怀尔杜安定制SMF一体式背夹PD-1钢纯钛雕刻美国国旗图案手柄高端手工折刀
  • 2407
SMF Unibody (Integral) Frame from Duane Dwyer Custom!
Just to clarify those unfamiliar with the term, integral frame means that the whole handle/frame is milled from a single piece of titanium. There are no screws, no standoffs, no backspacer, etc. Just a solid chunk of titanium that everything that is not a knife was milled away. Aside from just being freaking cool, this of course leads to a very solid feeling knife. 

This Dwyer Custom Integral Frame
- The 316 stainless steel wire clip can be reversed for left hand carry by loosening the carbide glass breaker and flipping to other side.
- The pivot rides a press fit sealed bearing on two piece titanium axle for incredibly smooth precise action
- To make it smooth on the off side if the clip is switched, Duane moved the lock bar scallop inside the frame. 
- Notice the lower line which is normally straight on a SMF, now has a gently flowing curve.

The Blade: Double 3/4 hollow ground spearpoint profile in brushed/satin finish signed "Dwyer".
NOTE: Dimple in blade near Duane's signature is from hardness test. Duane has informed us he is now personally testing each blade post-heat treat.

The Frame: One solid chunk of titanium with a multi color anodized finish. The solid frame has a carbide glass breaker tip that can be unscrewed to allow the clip to flip to the other side. See that screw on the spine side of the frame? That is an adjustable blade stop for when the blade is closed so the detent engages precisely. 

About Carpenter PD-1 Steel: It all started years ago with VascoWear manufactured by Teledyne Vasco which was an incredibly tough alloy. Crucible Steel then later came out with their version called Cru Wear (slightly different formula). With the advent of the powdered metal process, Crucible then applied this superior process and further tweaking the mix to create CPM 3V (which we all know and love). Fast forward to now and Carpenter Steel has gone back to the original VascoWear formula and updated it and applied their modern Micro-Melt powder metal process to it to create PD-1. Duane says PD-1 is supposed to be very comparable to the CPM 3V with the difference being the carbides. It is supposedly the same toughness and maybe a BIT better in wear resistance than 3V. Again, not a stainless, so corrosion resistance is also on par with 3V.

Specifications
Overall Length(全长): 9 1/4 in (23cm)
Blade Length(刀片长度): 
4 in(10.2cm)
Cutting Edge Length(刃长):
 3 1/8" (7.9cm)
Weight(重量):
 7.2 ounces (204克)
Blade Steel(刃材): 
PD-1钢
Handle Material(刀柄材质):
 Titanium (钛)
Included(附件): Padded Velcro Pouch (收纳包,出生卡,魔术贴)



  • 暂时还没有任何用户评论
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
用户名: 匿名用户
E-mail:
评价等级:
评论内容:
验证码: captcha

购买记录(近期成交数量0)

还没有人购买过此商品
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
  • 暂时还没有任何用户评论
总计 0 个记录,共 1 页。 第一页 上一页 下一页 最末页
用户名: 匿名用户
E-mail:
评价等级:
评论内容:
验证码: captcha
分享到: 微信 更多
在线客服